Neptune RC5-7 small neck radiator cap, 48 kPa
The Neptune RC5-7 is a 48 kPa (0.48 bar, 7 psi) radiator pressure cap for radiators with a 25.4 mm (1 inch) filler neck. It replaces the T1-7M cap and is sold per cap, so fleets and workshops can order exactly the quantity they need.
Choose by the pressure stamped on your old cap and by the filler neck. The number after the dash in Neptune’s code is the pressure in psi, so RC5-7 is 7 psi.
Why the right pressure matters
The radiator cap holds the cooling system under pressure, which raises the boiling point of the coolant. A cap that no longer seals, or one with too low a rating, lets the engine boil over on a hot day or on a long climb. Too high a rating overloads the radiator, hoses and water pump. Fit the rating the vehicle was designed for.
Specifications
- Brand: Neptune
- Part number: RC5-7
- Type: radiator cap, 25.4 mm (1 inch) filler neck
- Opening pressure: 48 kPa (0.48 bar, 7 psi)
- Replaces: T1-7M
- Sold: per cap
Fitting tip
Only open the radiator cap when the engine is cold. Check the rubber seals on the new cap and the sealing face of the filler neck; a damaged neck will leak whatever cap is fitted. Top up with the correct coolant, not plain water.
Questions we get asked
How do I know which pressure I need? The rating is stamped on the top of the old cap, in kPa, bar or psi. Neptune’s number after the dash is psi: 4, 7, 10 or 13.
Is this the right cap for my truck? Only if the filler neck is 25.4 mm. Truck radiators with a no-top-gasket neck take the Neptune RC4 truck caps. Send us the old cap’s code or a photo and we will confirm.






There are no reviews yet.