Marine Grease EP1 | Blue Calcium Sulfonate Boat and Trailer Grease
Greyhound Lubricants Marine Grease EP1 is a blue calcium sulfonate grease with a adhesion system, made for equipment that lives in or near water. It stays on the part through saltwater immersion, pressure washing and spray, and protects steel against the rust that destroys trailer bearings, winches and deck hardware.
The adhesive NLGI 1 consistency clings to bearings, pins and gears while still pumping easily through a grease gun. Calcium sulfonate gives it a very high dropping point, outstanding corrosion protection and mechanical stability, which is why it outperforms the lithium marine greases commonly sold for boat trailers.
Key Features & Benefits:
- Saltwater resistant: calcium sulfonate thickener resists washout and salt corrosion far better than lithium greases.
- Adhesive: clings to wheel bearings, trailer rollers and exposed pins instead of washing out.
- Extreme pressure: protects trailer wheel bearings and winches under heavy loads.
- Wide temperature range: -30 °C to +190 °C for hot bearings and cold water.
- High dropping point: does not run out of hot trailer hubs after a long tow.
- Compatible with most trailer and marine greases: top-up without a full clean-out.
Applications:
Boat trailer wheel bearings and rollers, jet ski and ski-boat trailers, outboard motor pivots, steering linkages and propeller shafts, anchor winches and windlasses, deck hardware, hinges and gate fittings near the coast, irrigation and borehole pumps, water treatment and wash-down plant, any bearing or pin exposed to water.
Note: Not recommended for mixing with polyurea greases. Repack trailer bearings before each season for best protection.
Typical Properties:
- NLGI grade: 1
- Thickener: Calcium sulfonate with adhesion system
- Colour: Blue
- Dropping point: >280 °C
- Operating temperature range: -30 to +190 °C
What’s in the Box:
Available in 500g, 5kg, 17kg sizes. 52kg and 180kg kegs available from head office.









There are no reviews yet.